The Do’s And Don’ts Of Treating Bilge Water

Most of us boaters have to deal with bilge water on a daily basis. There is no question that thinking about it is just as much of a daunting process as dealing with it, though unfortunately, leaving it alone can have far worse consequences. You need to find the right way to handle bilge water.

We’re going to be honest, your boat is often referred to as a vessel, and there is no way to completely avoid getting bilge water down below. It’s just a part of boating life. Of course, what matters most is how you decide to deal with it.

Bilge water can get into the hard-to-reach, lower compartments that sit at the bottom of your boat, leaving you with expensive and labor-intensive consequences in the long run, if not taken care of. Having good bilge pumps can minimize the amount of bilge water that your vessel carries around. But to keep your boat in pristine condition 100% of the time requires a lot of labor, or an Arid Bilge System. Keeping your bilges dry can also help to keep your vessel free from possible failure, while keeping your family, guests and crew safe.

If you’re sick of dealing with the negative consequences of bilge water or the labor intensive wet shop vac, we highly recommend picking up an Arid Bilge System. Simply use our dry bilge vacuum system, and there will be no need to further concern yourself about pesky bilge water. The bilges will remain dusty dry automatically.

It is as easy as installing the Arid Bilge System and leaving it running. It then picks up all of the bilge water before it becomes nasty, keeping your boat’s bilges 100% bone dry. Let’s dive into the do’s and don’ts of treating bilge water, so that you can get a better idea of why an Arid Bilge System might be your best option.

The Do’s And Don’ts

DO make sure to keep your bilge clean as often as you possibly can. A dirty bilge can lead to a whole mess of problems, including rust, corrosion, odor, humidity, mold growth, and more. These problems can lead to a smelly and uncomfortable boat. They can even eat away at the electrical, bonding and electronics systems. These sorts of damages can easily cost you thousands of dollars in repairs.

DON’T continue using temporary “solutions” to clean out your bilge. Many people rely on temporary fixes such as ozone machines which cause other issues, the wet vac which is very labor intensive and bilge cleaners which end up polluting the surrounding waters. All these “solutions” merely put a Band-Aid on the problem. You’ll still have to continuously stress about your bilge water and make sure that you are taking care of it all the time.

DO install a dry bilge vacuum system. Of course, the Arid Bilge System is the only multi-compartment system on the market. It slowly and efficiently vacuums liquids across a range of up to 75 feet from the central unit, keeping all your bilge compartments 100% dusty dry.

DON’T waste your time adding additional pumps. Arid Bilge is a high-quality and functional bilge vacuum system. It is the only system on the market that is proven to keep bilges 100% dry. It doesn’t make sense to go with any of the other companies pumps, when you could be getting the best of the best for a price that doesn’t break the bank.

Why Go With Arid Bilge System

We could think of a long list of reasons as to why you should purchase the Arid Bilge System over the companies that sell just pumps, though we’d have to write you an entire article just for that. The proof is in the vacuuming.

Do Install an Oily Water Separator if you can’t legally discharge overboard without one. Once you have an Arid Bilge System installed, we also offer the Eco Friendly Discharge Companion which is a permanently installed oily water separator. The Eco Friendly will retain the oil-found in many bilges. It holds the oil and fuel inside the separator, passing treated hydrocarbon-free water through, which is then normally discharged overboard. The three different Eco Friendly Discharge Companion models can also be fitted with any one of three different alarm systems, to let you know that oil or fuel is accumulating in the separator. Now, you are often able to identify that there is a developing oil or fuel leak, long before there is a big mess down below. Once there is a big mess down below, you often end up hiring a local company to show up with expensive equipment for the clean-up, and then you still have to locate and fix the leak that caused the big mess in the first place. With the Arid Bilge – Eco Friendly combination on board, you have dry bilges with small trails leading off the the source of a developing leak. Often it may be as easy as changing a hose or fitting, after the alarm had gone off, long before the big mess occurs. So it’s not just about avoiding the high fines, but the main caveat is the preventing of a big mess, and saving your equipment.

It should now be an obvious conclusion, to go with the Arid Bilge System. We have a top-notch line of products for all kinds of boats that work to help keep your bilges dry and oil free so that you can enjoy your boat the way you want to. Our superior marine bilge systems are the best products to help keep your boat clean and healthy for many years to come. Simply install our system and leave it to do its work automatically keeping the bilges clean and bone dry.

We wish you a happy and dry boating experience for years to come!