Arid Bilge Systems Series 1 – Single Intake Only
Series 1 units have a single intake port with a built in power supply that accepts either 12 or 24 volt DC power
Arid Bilge is automatic, reliable, flexible, and best of all, it really works.
-Eliminate the #1 source of on board odors
-Lower on board humidity and prevent condensation damage
-Find small leaks that now leave trails through a dry bilge
-Stop mold and mildew before it starts to grow
-Enhance the vessel's resale value
-Available with a single intake port (zone) only
You will notice the Arid Bilge difference within 24 hours of installation.
7.94 inches / 20.15 centimeters
5.5 inches / 13.9 centimeters
4.25 inches / 10.7 centimeters
|Box dry weight||
4 pounds / 1.9 kilograms
5/32” diameter, 20 feet fixed length, excess can be spooled but not cut.
|Unit Maximum Expected Flow Rate||
5 US quarts / 5 liters per hour
0.022 amp average standby draw, 0.26 amp average run draw @ 12 volt DC
This unit meets USCG 33CFR 183.410 ignition protection
1/2" barbed fitting
Software and processor – proprietary
|Compressor / vacuum pump||
|Main unit material||
Air injected white PVC plastic
one year parts and labor.
Accepts 12 volt DC or 24 volt DC input power.
|Pick Up Type||
Mini Standard, Offset, Pickup Wand